Separate names with a comma.
The Richmond locker kit is probably the cheapest and the noisiest but I'd go with the Auburn if I was you. It is as close to the original Super...
I found this in a local storage yard. No name or ph # either. It's just sitting out in the open rotting. I begged the owner to give me some way of...
Hook a 50 lb pressure gauge to the center plug on the trans body and test the pressure. It should be around 35 lbs in neutral at idle. I had an...
Hey buddy, I live in Lincoln City on the coast about 1 1/2 hours from there Call me with the details. 541-992-4787 Dave
OK. I believe Crane Cams has a nice thumper cam kit that will give you the thuppity thump you want and still give you some bottom end torque...
Edelbrock has a package set of intake, cam, lifters and springs if you want to know that works very well together on a stock engine with a few...
Leave her home?
When I read this post, I remembered a post from another forum about some junkyard swaybars that are interchangable with a little work. I also had...
I have found that a 1 inch spacer will give you a bit more top end and does allow for a bit of space from the heat of the engine. I all depends on...
The transmission has a rectangular pan if it is a 700r4 and an odd "S" shaped pan if it is a 200r4. I have had the same thing happen to my 1984...
Thanks for the ideas guy but the engine is a 1971 Windsor 351 block stroked and bored. The heads are Edelbrock Victor Jr's and they have been off...
transmission overflow First I'd check the # 1 accumulator piston. Actually I'd check for leaks overall. If the govenor came apart thats where the...
Coolant leak Ok I've had about all I can stand with these heads leaking. I've had the pair off twice now and added every type of sealant that...
Cam for your car Comp cams has a download that can help called Comp Cams software. It'll really help you decide which cam for your application....
84-87. Body changed in 1989 to the rounded version.
I know the photos are small but I can't figure how to make em bigger without making them all blurry. Anyway, Here are a couple of new photos.
Well I kind of solved the issue with a bottle of block seal. I hated to do it but I have tried everything else. After two sets of head gaskets...
My buddy George made this for me in about an hour and didn't charge me a thing so I am already ahead of the game. Especially since I couldn't find...
