Separate names with a comma.
While waiting on the 67 VC to get painted I decided to change the filter on the trans. After taking the pan off I noticed that the filter just...
Restoration Specialties can use your old pieces as a pattern and make new ones or sell you the pieces in 6 ft lenghts and you make your own. You...
Check with SMS Fabrics , they have the correct vinyl for my 67 vista. Tony
I agree it's not a show car but how often do you drive show cars? I think its a great driver and thats what most people want, including me. I...
67 vista cruiser You're right homestar,after a car has sat for awhile its easy to forget the number of times its been primed and blocked.Here's a...
67 vista cruiser some progress has been made,the body has been assembled and the gaps are being adjusted to better than new.All the little things...
I'd like to take credit for the metal work ,but I can't. I have a good body man that did the work. I did most of the disassembly and I'll do most...
1967vista I'm going back to the original aquamarine bottom/ white top.It's also aqua inside.
window motor Vista Is your motor bad or are you just looking for a spare?
1967 vista I'm sorry to say it's not painted yet. All the metal work is done ,the doors are on and it been primed and blocked twice. All thats...
67 vista cruiser tailgate Check the switch on the passenger side tailgate jamb.If that switch is not working ,you wont get a ground to the motor...
floor covering You can try SMS Fabrics in Oregon. They had it for my Vista ,and in the right color too.
Thanks for the tip Norm, I'll try'em this weekend and let you know the results.
I've been working on the l6 conv. while the vista is in the body shop and started cleaning the wiring harness connectors. Is there a simple way to...
61 olds I believe that wagon was here in NC a few years back. A guy at a local chevy dealer had it and I was told he traded for a H-D. That is...
window seal Contact Restoration Specialties 814-467-9842 ,they may have it. If you have your old seal you may have to send a small sample to them...
Thanks guys for all the positive comments. As far as money, I haven't sat down and counted each dollar spent. I would guess around $8000 so...
Here's an update on the metal work. The first pic is the fitment of the patch,the second is the tack weld and the third is the finished weld. Lots...
here's an update on the metal work. This is the rear compartment. [IMG]
That floor was cut out of a 66cutlass 4dr sedan that I got several years ago. Someone cut the rear clip off and I salvaged the floor and dash....
