Separate names with a comma.
Not a good idea. The top adds a lot of strength to the overall structure. Take it off and you have a vehicle that wants to twist like a pretzel,...
Actually, if the oil ring is broken and the cylinder walls have excess oil on them, it might raise compression in that cylinder especially when cold.
Have you checked for a bad plug wire? This will definitely cause a plug to foul. Might be a dirty contact in the distributor cap. With that...
Around here, it is quite pricey to have a Q Jet rebuilt. Prices run from close to $200 to well over $300. I usually buy a refurbished one from...
Crumpled newspaper will absorb odors. Unfortunately, the stink is in the seat upholstery and will most likey have to be replaced. Being placed in...
You will probably find a dirty connecton creating resistance. Take the connecton loose, clean it good and dab a little contact grease on it. Put...
Third picture from top...signs on the wall.......what in the world is "fart-binder"??????:rofl2:
Have you checked to see if the EGR is stuck open? Does not sound all that bad.
There are lots of places you can have a vacuum leak besides the carb lines. The vacuum tree, carb base, intake are the most common, besides a bad...
I have had 2 vehicles with a miss that about drove me nuts, as well. One was a 318 Dodge and the other was a 350 Chev. I isolated the cylinder...
All the expensive alarm systems, Pit Bulls, Rottweilers, locks and such will not foil a would be thief as quick as a hidden switch........one that...
I have ordered 2 Q-jets from Summit Racing. They are about $300, unless you catch them on sale, but the only problem I ever had was the first one,...
You would be so much ahead of the game to just replace the automatic tranny. If the crank is not drilled for the pilot bearing, the crank will...
There are tons of rims out there in all sizes that have the 5X5 bolt pattern. Really no need to convert to 4.75. Stock Chevy truck rallyes with...
Check this site. A lot of great info on what fits what. http://www.myboltpattern.com/
You need to find out why the cam failed. Lubeing a cam up on installation is critical. I use Moly Disulfide and pour a can of STP over that. There...
Welcome to the forum! Great find! As for the question about should these cars cost money before you can drive them......if it has tires or tits,...
The 302 is the way to go. Tons of parts for them. The FE's were good engines, but performance wise left a lot to be desired. All the 390s I had...
My '91 Custom Cruiser had a few gremlins. When I opened the tailgate, I would lose the presets on the radio and it would switch to AM. Didn't...
Women don't drive, they just aim.:rofl2:
