Separate names with a comma.
The only thing you have to do is change oil in the system. R12 uses Mineral oil and R134 uses Ester oil. Blow the lines out and reinstall Ester...
I am not sure how yours is made, but I have repaired many gears where the inside had broken. If the nylon gear is still good, clean it out and...
I was a parts manager at a Ford dealership in the late 70s, and I assure you, EGR spacers leaking were a major problem. However, double check your...
You might consider a set of Mopar police/taxi rims. They really looked great painted body color, with a stock dog dish or baby moon cap and trim...
Be sure to give Discount Tire Direct a try. Free shipping, but their tire prices are a little higher to cover it. Sometimes they have a special,...
The dash lights and tail lights are on the same fuse. If the tail lights work, the light switch is probably bad.
I usually gravity bleed brakes. Open the bleeder fitting on the wheel cylinder or caliper, let fluid trickle out, watching for bubbles. When no...
I am familiar with Trim Parts carpet. I ordered 2 sets for vehicles I used to own. One set was for a Dodge Ramcharger which they fit pretty well,...
Auto Custom Carpet makes some great molded carpet. I have used a lot of it and it FITS!. You can go there and check the part numbers for the...
Stabil makes a treatment that is supposed to counteract any adverse Ethanol effects. I think it is OK as long as the vehicle is driven regularly....
The discussion of premature cam wear has been around for quite a while. I have read many articles about what can be used and have found that STP...
Anything that makes the tranny shift harder is a good thing. I always have shift kits installed in my trannys. My '86 Chevy shortbed has a TH350...
Thanks for all the replies. I think the Eddie is a 600 CFM which should be about right for a 350 on the street. I know the truck will scream even...
I am running a 350 Chevy engine that has been modified some. I don't know what was done to it, as it had been built when I bought the truck. The...
Found the culprit. The belt idler pully bearing going bad. Cheap and easy fix. Thanks to all the contributors. :banana:
I know the extension housing seal leaks a little, so I felt it was safe to add some. I checked it after adding and it is a little overfull, but...
Hmmmmmmmmmm.thanx Tedy....definitely worth a looksee.......
I think it was one of those obnoxious, loud little Toyotas.:rofl2:
Driving my 95 Chevy G20 van yesterday, made a left turn and noticed a whining noise. Thought the PS might be low on fluid, but it continued...
If you are losing oil pressure for whatever reason, the light will usually go out when you accelerate and come on at idle. Sounds like maybe a...