Separate names with a comma.
Sweet!!!
IMHO I believe that the middleman is most responsible for most all price increases. They all saw an opportunity and jumped on the bandwagon.
That tank looks like the one in my 60 except for a vent on mine near the filler neck. It's also in waaaay better shape than what I had to work...
Update on my tank. Got it back in the car and filled it with a couple gallons of gas. No leaks so far. I'll put more gas in it when I can afford...
Worked at an Auto electric shop in Detroit back in the 70's where we had a blue 55 Chrysler we used as a push car that we called the "Blue Goose".
I just went through this with my 60 Ford Courier wagon. Nobody seems to carry tanks for wagons. Pulled my tank off to clean it and opened a big...
Sounds like it's similar to the 57 Ford I had. Mine had a long shaft that ran the length of that tube into the steering box. The steering worm...
IMHO the Ford 4100 is the best all around carb you can run on your car. I have one on my 79 Ranchero. You can get better performance with the...
Just a side note on the lower bolts in the control arms. The bolts that run through the frame can be impossible to remove after you get the...
Judging by the looks of that front floor I would crawl under the dash and have a look at the cowl vent drains at each upper corner. They are...
I doubt that the gear has crumbled apart. I've never seen a SBF do that. My guess is it's just worn enough that it just runs that bad. Back when...
Did you ever get this running right?
There's not too much you can rebuild on that distributor. Don't recall replacing any later Ford distributors from being worn out. I would pick up...
Just for the heck of it, unplug the spout connector and see if it runs any better.
You mentioned you thought the place working on it might be stumped as to what's wrong with it. Your car is going on 30yrs old, maybe they don't...
Been retired for 10yrs but I'll offer my .02. Code 18 points to SAW (spark angle wave) or SPOUT (spark output). It looks like you've replaced...
You could always just cut a coil off each front spring to lower it where you want it.
New guy here. Just discovered this forum. 70yr. old retired mechanic that spent over 40yrs in Ford dealerships in the Detroit area. Got tired of...