Separate names with a comma.
On the second run I got her to slow down a lot, still need to adj, the carb some more, adj the valves as they are a tad loose. But she ran much...
She has a heart beat after 40 years!!!!!! Ran her for about 2 minutes total at a high speed-still not sure how that happaened yet. But she runs...
I am using the tubular rods now and just don't know how it slipped out. Maybe next weekend I can fire her up.
OK update time: tinkered a bit to make sure I didn't miss anything before firing her up. And the B&**^%$ bent a pushrod on me. I have no idea how...
Yeah, so I tightened it down and put the covers back on. July 8 is the target date!
UPDATE: I thought I had an issue with the rockers on the passenger side not getting enough oil.Well I talked to the builder and he told me to...
OK. Time for another update: -I have hooked up the fuel line to the pump. -I have added an oil filter and oil!!!!!!! -Hooked up the horns-I will...
Found I have a Frankenstein 9”. So it will need some work done to it. Like a new pinion seal and yoke. Not all that bad really. But on the up side...
Twinkie, here is the port I was referring to. Sounds like it should be the same as a 2100. Just makes sense for production reasons. I tried NAPA...
Twinkie-I found a brake line at a local shop that actually fit and it is NiCop so I can bend it. I am hoping it seals up. It is the Distributor...
Small update: So the drive shaft is in and boy what a discussion I created with it. I am thinking it is an early 9" where a worker used a left...
UPDATE: well the drive shaft is in, wiring is 98% complete (waiting on the engine portion to fire it up), dash is in and just need to adjust the...
Hi All, So I am begining to put my dash back in the 57 Ford wagon that I have. I had the heater core rebuilt and they soldered up the original...
Update, got all of the turn signals working correctly now. The switch was so corroded I had to hit it with a cleaner, twice and run it back and...
Yes there is light now-I figured out the lights and they all work as they should! Now off to another circuit or two tomorrow! If I can do a...
She lives!!!!!! Not everything works electrically yet-no surprise there. So I am going to start hunting and killing gremlins now.
I am not a GM guy and I know GM like to do some 'odd' things with their parts/engines. But being a buick engine are parts hard to come by? I am...
You can try the following as well-if you have not already: -Ford Barn -F.B.-53-59 Ford lovers Someone there will have an answer for you. Mike
Update: working the wiring over finally. got the back half done, most of the front is now done and will be headed to the dash next. I am 'hoping'...
Still rewiring mine.....got down to single digits and slowed me down.
