Separate names with a comma.
Before and after. now i wait for the vinyl to shrink back...
Whatever you boys do, DONT use paint stripper on the steering wheel. It will MELT IT. Ben there, done that.
Have you discounted the easiest color combos? A different shade of gray, white, and black?
Thanks for the input. I went out yesterday and cleaned the armrests with some thinner, taped off the stainless insert and shot the light coat and...
Omni base with four coats of clear. They already buffed it out but had to reshoot the hood. The surface is pretty smooth on the roof but fenders...
Marty-enlighten me as to what you use for a final "cut and rub".. Sand paper grit, type of polishing compound, and type of buffer pad. My shop...
Anyone know why my pictures come up sideways?
Assembly required
work in progress
martyk98 submitted a new Garage Item: 1964 Ford Country squire work in progress Read more about this garage item here...
If that is what you can see, OMG, imagine what you can't see. When these things rust out, they rust out BIG TIME
thanks Joe. I knew SMS made repops for my door panels but at $850 a set for my driver quality Squire, I'm not ready to pony up until I give the...
paint is almost done, one final cut and rub. Wood trim is at the vinyl wrap shop. New carpet and bumpers are here. Door panel respray is not going...
interior carpet? Good luck with that one and if you find an outfit that will do that let me know, I have the same issue with my 64 Squire....
Black, solid red and yellow are to the motor. Yellow, and two striped red are to the tailgate key. Yellow, black, and three reds go the the...
I know this sounds stupid but I have to ask. Do you have 5 wires leading from your motor unit?
I'll look at mine to see if I can locate some "special" limit or relay, but I doubt it. If you bench tested the unit and it works, then not in...
If you found antifreeze in your oil, you have trouble. Sounds like a gasket/seal failure from your intake manifold or a cracked block. If you're...
Unless you're going for a show car, might I suggest cutting the existing floors 1/4 inch less that the replacement pans. drill holes in the...
I think you have my wagon confused with someone else's. I haven't posted any finished pictures, although the previous owner may have. I'm not...