1960 Chevy Parkwood Frame Modifications

Hello All! I like to share this journey to recover and improve my Parkwood wagon. The rear half of the frame was not recoverable and it was easy to decide to remove it. This gave me an opportunity to improve the driveline and the overall safety.

 

Man, that was pretty crusty! Looks like you are doing some pretty substantial modifications. Is that a 4 link going in?
Just a little more rust repair to do in the rear and you'll be on your way to cruising in style!

 

Corvette rear axle assy.

 

C4 rear with Posi. I’m using the stock corvette dog bones for the 4 link setup. I think in time if\when I need to better fine tune I will replace the dog bones with heim joint setup.

 

Nice!
You apparently don't do anything 'halfway'....just an observation.

 

looks really good. ever think about removing the driveshaft tunnel so you could run a one piece driveshaft

 

Wagon Man: I did look to remove the tunnel, but settled with keeping it. I thought it would add too many hours and a little more complication. The metal is in good condition and just needs to be wire brushed. At this point I need to start wrapping this up

 

I'm looking forward to seeing more progress photos.

 

Is the entire floor pan available and intact?

 

Been slowly making progress on this project. The rear frame modifications are nearly completed with minor tag on items. The suspension setup for air system and bags. 5-6” ride height and slammed @ 0 psi .

Picture is mocked for 0 psi. The tires are tucked high.



4 link setup works smooth with no binding. I did have bidding issues and corrected problems related to the control arms not being the same length.



Getting there.

 

Awesome build you got going! I didn't see this thread when you started it in 2018, looks like it will be bad a$$ when you get wrapped up. Do you think you'll have it ready for spring? Can't wait for more pics.....Longroofs Rule!

 

That's very impressive. I'm excited to see how this turns out.

 

Yes the pan is available, I found them online and plan to make job a little easier

 

Balancing way too much for spring 2021. But I’m pushing ASAP.. spring 2022?

 

Great project! Good luck with getting it finished!.....Longroofs Rule!