Roadmaster trailer hitch

does anyone know the rating of the factory hitch on the 92 -96 Roadmaster wagons? My wagon does not have a hitch and I was wondering if the holes are all pre-drilled from the factory.
I have a 21' pontoon that wants to follow my woody to the river. Any advise or does anyone have a hitch?

thanks

 

Here's the Reese page: they make 2 - 3,500 LB and up to 10,000 lb. for the 1992 & up Roadies.
http://www.reeseprod.com/

 

But...check the Service Parts Identification tag in the spare wheel well. To get a trailer going with any pull weight you need to be equipped with the trailer package. The package comes with 2.96 gears instead of the 2.56 and with a G80 posi, different springs etc.

 

I got a local quote of $350 installed and thought if I could do better on my own I would. I have tools and some knowledge to do it on my own.

thanks

 

Thanks for your input. I will take a look in the am I know it has auto load leveling system (that has been disconnected and it does have a posi

 

Get a trans cooler too one with a electric fan so you don't over heat the trans

 

thanks keep em comin

 

Jamie get a programmer to boost your torque you will need it.

 

Jaime...if your wagon is factory equipped with the trailer package...many of them are even though they have no hitch...you should have everything you need in the car. I think the factory package will allow up the 5,000 Lbs of tow weight.

 

so now I just have to find an OE hitch Anyone have one in their back pocket?

 

and where do I find this parts ID? No tags in the spare area just in the jam of the tail gate. Any numbers I should be hoping for?